Drone With Gps

Zyyini 5.8G FPV LCD Receiver Monitor, 40Channels 7Inch LCD Screen Video Transmission Display FPV Drone Accessory Built-in Dual Receiver 600cd/m2 100-240V for FPV Drone
No Reviews

This LCD Screen FPV receiver monitor with stable performance and clear image quality. Built-in dual receiver automatically for best reception automatic antenna switching, and it can receive 2 different channels at the same time. Small size and lightweight, a simple and effective accessory for FPV drone. Specifications: Condition: 100% Brand New Item Type: FPV Receiver Monitor Screen Size: 7inch Resolution: 800 x 480 Brightness: 600cd/m2 View Angle: 140/120 degree(Horizontal/Vertical) Working Voltage: DC7-16V Battery: Li-Polymer Battery 2000mAH/7.4V(Built-in) Power Consumption: maximum 650mA at 12V Battery Charging Current: 850mA at 12V(maximum) Working Temperature: -10? ~ +65? Size: Approx. 180 x 120 x 50mm / 7.1 x 4.7 x 2inch(Note: Sunshield height: 28mm / 1.1inch) Package Weight: Approx. 853g How To Use: 1) A AV OUT: A receiving AV signal output, it must be in A mode. 2) B AV OUT: B receiving AV signal output, it must be in B mode. 3) DIVERSITY AV OUT: AV signal output received by DIVERSITY, DIVERSITY mode is required. 4) DC / + 12V DC IN, + 12V power supply, the working current of the device is 650Ma @ 12V, the maximum charging current of the built-in battery is 800mA @ 12V; if the device is working while charging, please pay attention to choosing a charging device with a rated current greater than 2A / 12V . 5) The battery has a built-in 7.4V 2000mAH high-capacity polymer battery. When the battery is charged, the unit marked with the battery in the lower left corner of the device will light up after the charge is completed, here is a bright green LED; If not used for a long time, please charge the device every four months to protect the battery. Package Include: 1 x FPV Receiver Monitor 2 x 5.8G Antenna 2 x AV Cable 1 x Charger With US Plug 1 x Bag Note: 1. Dear customer, Please rest assured to buy without worrying about the plug adaption. We will provide an adapter for you according to different country standard and ensure its normal use.


waveshare SIM7600G-H 4G DONGLE LTE USB Adapter for Industrial Grade 4G Communication and GNSS Positioning,Support/PC/Raspberry Pi/Drone/Industrial Computer,150Mbps Downlink Rate,Global Band Support
Rated 4.0 out of 5 based off 2 ratings

Function
1.SIM7600G-H 4G DONGLE
This is a global band industrial grade 4G dongle, which features up to 150Mbps downlink rate and 50Mbps uplink rate, supports operating systems including
Windows/Linux/Android. By simply connecting it to laptop, PC, Raspberry Pi, drone, industrial computer, or other IoT host device, it is easy to
use 4G network connection on the go.

2.Global Band Support
Supports Global 2G/3G/4G Communication

3.Multi Host Support
Working With Laptop / Raspberry Pi / Industrial Computer...
Up To 150Mbps Downlink And 50Mbps Uplink*

4.Multi System Support
Supports Windows/Android/Linux
Just plug it into USB port, go through some driver installation and simple configuration, the high speed 4G network connection would be ready to use

5.Cloud Communication
Supports USB/UART Communication Interfaces
Supports TCP/UDP/FTP/FTPS/HTTP/HTTPS Communication Protocols

6.GNSS Positioning
Supports GPS, BeiDou, Glonass, LBS Base Station Positioning

7.Industrial Grade 4G Solution
Integrates SIM7600G-H Module, Industrial Grade Design, Stable Connection, More Durable

8.Flexible Antenna
Flexible Structure Antenna Design, Allows Multidimensional Rotation For Better Connection

9.4G SIM Card Slot
Onboard Nano SIM Card Slot With Sliding Cover, Easy To Use

10.Three LED Indicators
Easy To Check The Operating Status, Convenient For Programming/Debugging

Package Content
SIM7600G-H 4G DONGLE x1
LTE Antenna x1
USB extension cable x1
6PIN jumper wire x1
Screws tool kit x1

Note
Development Resources are provided , please feel free to contact us if you need.


Two-Way Lora Signal Booster, 433MHz /510MHz /868MHz JMT Power Signal Amplifier Module WiFi Range Extender Transmitting & Receiving for Lora Router Ethernet RC Drone (IOT-433MHz SMA)
Rated 5.0 out of 5 based off 1 rating

Features:
1) This 433MHz/510MHz/868MHz signal amplifier module is a two-way amplified TDD working mode ,that is the transmit power and receiving sensitivity will be amplified equally.
2) The receiving/sending link has a high degree of isolation, and the receiving link can withstand strong external interference without causing self-excitation of the loop.
3) Compatible with various modulation methods such as LORA and FSK/ASK/OOK/MSK/GFSK.
4) The default working frequency band of 433MHz signal booster is 420MHz-480MHz, and it can be applied to any frequency band between 300MHz-600MHz by adjusting the parameters (bandwidth 60MHz, such as 300MHz-360MHz, 520MHz-580MHz...), if you have such a requirement, please contact us.(Hand-held walkie-talkies cannot use this module to achieve the purpose of extending the transmission range due to their high transmission power)

Basic Parameter:
1. Receiving gain: 11dB±2dB
2. Receiving noise figure: at most 2.0dB
3. Transmission gain: 5dB ? 11dB (±2dB) adjustable
4. Recognition threshold for receiving and sending switching: -2dBm
5. Input power range: 1dBm-25dBm
6. Operating Voltage:The power supply voltage can be between 3.6V-6.0V, maximum transmission power increases as the supply voltage increases.
7. Maximum transmit power:31.5dBm (1.4w) at 3.7V supply voltage; 33.5dBm (2.3w) at 5.0V supply voltage; 34.5dBm (2.8w) at 6.0V supply voltage

Work status indication:
- Receiving : green light is on, blue light is off
- Transmitting : blue light is on, green light is off
- In TDD working mode, the blue light and green light will flash alternately

Working current:
RX status: 10mA (±3mA)
TX status: at most 800mA (3.7v power supply); at most 1000mA(5.0v power supply); at most 1500mA (6.0v power supply)








MUMICO WiFi FPV Drone with Dual 4K HD Cam - 2.4GHz Quadcopter with Altitude Hold Headless Mode/360° Rolling/Trajectory Flight/Camera/Video/One Key Start- Remote Control Toys Gifts for
No Reviews

100% brand new and high quality.
    Quantity: 1pc.
    Material:Plastic/Metal/ Electronic components.
    Color:Black.
    Frequency:2.4G.
    Lens parameters:Dual 4K front lens.
    Channels:4CH.
    Suitable age:14+.
    Body Battery:3.7V 600mAh lipo.
    Motor Model:716 Coreless motor.
    Charging time:60 mins.
    Flying time(Single battery):10-12 mins.
    R/C Distance:80 meters.
    Image Transmission Distance:40-60 meters.
    Image transmission signal:WiFi.
    Charging mode:USB charging cable.
    R/C Mode:Left hand throttle.
    Speed gear:Fast/Medium/Slow.
    Lens Angle:Adjustment,90-180 degrees.
    Remote battery:3xAAA Battery (NOT Included).
    Product Folded size:8x5.5x4cm(3.3x2.2x1.6in).
    Product Unfolded size:22x14x4cm(8.5x5.5x1.6in)(with retainer).
    Packing size:18.5x15x8cm(7.3x6x3.2in).
    Product net weight:0.2kg/0.44lb.
    Product gross weight:0.316kg/0.7lb.
    Instructiongs:
    Because the size of the product is measured manually, there may be errors.
    Package Contents:
    1xDrone.
    1xRemote control.
    2xInstructions.
    4xProtective rings.
    4xSpare blades.
    1xUSB cable.
    1xScrewdriver.
    1xStorage bag.
    3xBattery








Compustar CSX9900-AS All-in-One 2-Way Remote Start & Alarm Bundled with + (1) Bypass Module and (1) Drone Mobile Module Package
Rated 4.1 out of 5 based off 5 ratings

CSX9900-AS Bundle All-in-One 2-Way Remote Start & Alarm Bundle with Bypass Module and Drone Mobile Module Included 3 Mile max range remote start and alarm bundle with one 2-way LCD remote. Includes CM900-AS control module, shock sensor, siren, 2 way remote, ANT2DWSS Antenna, BLADEAL Bypass Module, X1 Drone Mobile Module and LED. *This package does not include wiring diagrams or installation instructions. Item is not retail packaged, it is in bulk packaging as they are not for retail resale.  Installation not included, some vehicles require additional parts and labor. We recommend professional installation.




Alfa 9dBi WiFi Booster SMA Omni-Directional High-Gain Screw-On Swivel Antenna Network Adapters - Also Works for 3DR Solo Drone, DJI Phantom 3 Drone, Yuneec Typhoon H ST16 Controller
Rated 4.3 out of 5 based off 466 ratings

Replacing your WiFi antenna with This Alfa Antenna will significantly increase the range and strength of your WiFi signal. Our quality built omni-directional antenna is a direct replacement for the antenna that comes standard with your router, access point, VOIP device, or PCI card. Because it is omni-directional, no aiming is equired - it can send and receive WiFi in all directions. This Alfa antenna is stronger then the less powerful booster antennas offered by major manufacturers (Linksys HGA7S and HGA7T.) Installation is very easy - just twist off the factory antenna and twist on our Booster Antenna and you'll experience an instant jump in.


Works With all of the Models Below and With many other routers as well

Linksys

WET54G, WET54GS, WMP54G, WMP54GS, WET11, WRV54G, WMP11 PCI Card, WPS11, WRT54GC, WRT54GL
Netgear

R6700-100NAS, R6220-100NAS, FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311, WG311T,
D-Link

DIR-880L, DIR-842, DIR-605L, DIR-825, DAP-1360, DI-514, DI-524, DI-614, DI-624, DI-624S, DI-624M, DI-711, DI-713P, DI-714, DI-714P, DI-724U, DI-764, DI-774, DI-824VUP, DP-311P, DP-311U, DP-313, DP-G321, DP-G310, DPG-2000W, DSL-G604T, DSM-604H, DSM-622H, DSM-624H, DWL-1000AP, DWL-1700AP, DWL-1750,
Alfa

AWUS036H, AWUS036H1W, APA05, AWUS036NH, AWUS036NEH, AWUS048NH, AWUS036EW, AWUS051NH, AWUS036AC, AWUS036EAC, AWUS036ACH, AWUS052NH, AWUS052NHS, AWUS1900, U24
ASUS

RT-AC3200, Wireless-AC3200, Asus RT-N12 D1, RT-AC68U, RT-N66U, RT-N12,

TRENDnet
TEW-731BR

TP-Link
Archer C7, AC1900, AC3150


Alfa 2.4HGz WiFi Antenna - 7dBi RP-SMA Panel Screw-On Swivel for Netwrok Adaptors - Also Works for 3DR Solo Drone, DJI Phantom 3 Drone, Yuneec Typhoon H ST16 Controller, adds Range
Rated 4.2 out of 5 based off 602 ratings

Replacing your WiFi antenna with This Alfa Antenna will significantly increase the range and strength of your WiFi signal. Our quality panel antenna is a direct replacement for the antenna that comes standard with your router, access point, VOIP device, or PCI card. it can send and receive WiFi in all directions. Installation is very easy - just twist off the factory antenna and twist on our Booster Antenna and you'll experience an instant jump in.

PLEASE NOTE THAT THE INCREASE IN SIGNAL STRENGTH DEPENDS MOSTLY ON YOUR ROUTER OR ADAPTER THIS HELPS TO BUT IT CANNOT TRANSMIT OR RECEIVE POWER THAT YOUR MODEM OR ADAPTER DOES NOT HAVE!!! IT JUST GIVES MORE RANGE NOT STRONGER POWER!


Works With all of the Models Below and With many other routers as well

Linksys

WET54G, WET54GS, WMP54G, WMP54GS, WET11, WRV54G, WMP11 PCI Card, WPS11, WRT54GC, WRT54GL
Netgear

R6700-100NAS, R6220-100NAS, FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311, WG311T,
D-Link

DIR-880L, DIR-842, DIR-605L, DIR-825, DAP-1360, DI-514, DI-524, DI-614, DI-624, DI-624S, DI-624M, DI-711, DI-713P, DI-714, DI-714P, DI-724U, DI-764, DI-774, DI-824VUP, DP-311P, DP-311U, DP-313, DP-G321, DP-G310, DPG-2000W, DSL-G604T, DSM-604H, DSM-622H, DSM-624H, DWL-1000AP, DWL-1700AP, DWL-1750,
Alfa

AWUS036H, AWUS036H1W, APA05, AWUS036NH, AWUS036NEH, AWUS048NH, AWUS036EW, AWUS051NH, AWUS036AC, AWUS036EAC, AWUS036ACH, AWUS052NH, AWUS052NHS, AWUS1900, U24
ASUS

RT-AC3200, Wireless-AC3200, Asus RT-N12 D1, RT-AC68U, RT-N66U, RT-N12

TRENDnet
TEW-731BR

TP-Link
Archer C7, AC1900, AC3150


8dBi WiFi Antenna RP-SMA Male Wireless Network 2.4GHz 5.8GHz Dual Band with U.FL/IPEX to RP-SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers, PC Desktop, Repeater, FPV UAV Drone, PS4-2PCS
Rated 4.4 out of 5 based off 14 ratings

This dual band wifi antenna provides broad coverage to extend wireless range to dead spot and make the signal be better and longer range.
This wireless router antenna only use for MINI PCI-E Interface.
No soldering, simply replace your current antenna.

Antenna specifications:
Color: Black
Radiation: Omni-directional
Gain:8dBi
Frequency range(MHz): 2400-2500, 5150-5850MHz
Connector type: RP-SMA male (Hole)

Pigtail cable specifications:
Color: Black & Gold
Length: 15cm / 5.9''
Connector type: U.FL/ IPEX to RP-SMA Female

Package include:
2 X 8dBi dual band WiFi RP-SMA male antenna
2 X 15cm U.FL/IPEX to RP SMA female pigtail cable




2 x 8dBi 2.4GHz 5GHz 5.8GHz Dual Band WiFi RP-SMA Male Antenna+2 x 35CM U.FL/IPEX to RP SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers PC Repeater Desktop FPV UAV Drone PS4 Build
Rated 4.4 out of 5 based off 130 ratings


Features:
High gain- This dual band wifi antenna provides broad coverage to extend wireless range to dead spot and make the signal be better and longer range.
Compatible with- these omnidirectional antennas only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface.
Easy installation- no soldering, simply replace your current antenna.

Specifications:
Antenna Specifications: 
Color: Black 
Radiation: Omni-directional 
Gain:8dBi
Frequency Range(MHz): 2400-2500 & 5725-5850 
Connector Type: RP-SMA Male (Hole) 
Angle Adjustable: 90° 135° 180° 
Dimension: 16cm/ 6.3”(Unbend) / 13.5cm/ 5.31”(Bend) 
Wight: 13.5g / 0.48 oz per antenna
Input Impedance(Ω): 50 
VSWR ≤ 1.5 

Pigtail Cable Specifications: 
Color: Black & Gold
Length: 35cm / 14'' 
Wight:4.4g / 0.17 oz per pigtail cable
Connector Type: U.fl / IPEX (MHF2) to RP-SMA Female (Pin) 
Note: IPEX have 5 type: MHF MHF2 MHF3 MHF4 MHF5, MHF2 can be compatible with MHF use on Mini PCIe Wireless Card. 

Package include: 2 X Dual Band WiFi RP-SMA Male Antenna
2X 35CM U.FL/IPEX to RP SMA Female Pigtail Cable



CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME